Another Use for Injured Prints

Posted on August 27, 2010 by Linda Matthews

or How I Made a Mousepad in 5 Minutes

I’ve been threatening to make a new mouse pad for quite a while, but of course my “to do” list gets longer every day and it wasn’t a priority up until the other day when I finally couldn’t stand the sight of my old mouse pad which is all ratty on the ends, is covered in coffee and tea stains and probably breakfast stains as well, and is all together quite uninspirational and virtually unusable. I’ll do you a big favor and not show it to you.

So I finally decided that I could take 15 minutes out of my day to do this small project which also happens to be another perfect project for one of my injured prints. I’ve already shown you a couple of nice projects I’ve done using injured prints … a wallet I use every day and some lovely fabric postcards.

So I dug up another injured print and rather than the 15 minutes it thought it might take to finish the project, it in fact only took about 5 minutes and I have a fabulous new mousepad to show for it! Here’s how I did it …

The first thing you need is an injured print. This was a fairly large print that slipped at the end (of course) during printing and you can see that the colors went a little screwy on the right hand side. However the rest of the print was fine and almost just the right size for a mouse pad. I painted a sealer over the top of the print so it gave it a slightly rough surface and this will also protect from spills.

Inkjet Printing on Fabric

You also need some thick stabilizer like timtex or peltex, fusible on one side …

Inkjet Printing on Fabric

… and some grip matting …

Inkjet Printing on Fabric

I wanted a finished size of 8″ x 9″ so I cut each piece slightly oversize, then fused the print to the stabilizer, cut it to size, and zigzag stitched around the edges.

Inkjet Printing on Fabric

I was then going to fuse the grip matting to the back of the peltex however it didn’t fuse too well so I ended up gluing it on which worked perfectly. The grip mat is the perfect thing to hold the mousepad in place and stop it from slipping all over the place.

Inkjet Printing on Fabric

Then I carefully trimmed away the excess matting from around the edges being careful not to cut the stitching. And …. ta! da! one fabulous mouse pad whipped up in no time at all and much better looking than my old mouse pad!

Inkjet Printing on Fabric

And don’t forget .. my favorite method of making fabulous prints (injured or not) is using digital grounds – you’ll find LOTS of info here.

… Continue reading →

Making Fabric Postcards from Injured Prints

Posted on July 8, 2010 by Linda Matthews

This week I’ve been super busy making some fabric postcards for the upcoming Arts on Stage event I’m participating in next month, and along the way discovered that injured prints make fabulous postcards.

This is a print that really went screwy. It was printed using digital grounds on textured fabric (it’s a real pain in the *** when these prints go wrong because it takes so long to prep the fabric) and the image printed out in a portrait orientation instead of landscape and subsequently the right hand side of the image got chopped off severely.

Fabric Postcards

However even with the chopped of main image, I thought there might be enough of the image left to make an interesting postcard.

Here’s a tip for you …

Using a “viewer” to fussy cut your fabric or images makes things a whole lot easier. A viewer is easy to make – simply determine the size of your project and for a postcard I use 4″ x 6″, then cut a hole out of a piece of cardstock. Position the cutout area over your fabric to determine what looks best for your project and when you’re happy with what you see, mark the area using a fabric marking pen or pencil then cut it out.

Fabric Postcards

This is what was I ended up with for my postcard which looks kind of interesting don’t you think?

Fabric Postcards

And if you’ve never made a fabric postcard before, they can’t get much easier than this. For my image transfer fabric postcards I print out my image (or in this case I salvaged one from an injured print), cut to size some fusible peltex and a piece of cardstock for the back (I like to use a pre-printed backing on my postcards and if you want a copy you can download a copy here then print it out onto cardstock or fabric). And I also sometimes use machine wrapped cording to finish the edges.

PS I’ve been asked a number of time how I join my machine wrapped cording when I use it for edging or couching. You can find instructions here.

And once everything is fused together and the edging added, here’s my postcard.

Front …

and back …

Fabulous!

… Continue reading →

Things To Do With Injured Prints

Posted on May 28, 2010 by Linda Matthews

Before I upgraded to my new wide format Epson printer, I was using an old HP wide format to print my large images. It did a fair enough job but it was rather finicky about what what I fed through it and this resulted in a number of very large prints with some sort of misprint.

You can see on this photo that there is a stripe running through the print. This happened when the paper carrier got caught and wouldn’t feed although the printer kept printing. So it printed over the same section a few times before I managed to free it. As you can also see, it was only a few inches from the end of the print which was about 11″ x 15″ in size so it was a little annoying when it happened.

Image Transfer Wallet

I didn’t throw the print out knowing that one day I would find a use for it. And that day finally arrived when earlier this week I decided I needed a new wallet and this print was the perfect size once I trimmed away the misprinted piece. The finished size of the wallet is about 7.1/2″ x 4.1/2″ folded …

Image Transfer Wallet

… and about 11.1/2″ open. I used digital grounds to print the image so the color is very vibrant, and then I sealed it with a paint-on sealer so now the fabric is protected from dirt and grime and needs only a wipe to clean it, and it can also withstand the rough use that a wallet usually gets.

Image Transfer Wallet

The great thing about designing your own purses and wallets, is that you can make them to your own specifications and include extra pockets and holders as needed, so I added an open pocket for notes and a zipped pocket for change.

Image Transfer Wallet

I made the center section flip, so on the other side I have a pocket with a tab so I can store other bits and pieces securely, and also another open pocket for receipts and my check book.

Image Transfer Wallet

I edged it with some machine wrapped cording and a zig-zag stitch, and added a small unobtrusive snap for closure. I like the way the wallet turned out and I like it even more because I finally found a use for the print. Now, I just need to find uses for the other dozens of *injured* prints that I have lying around!

Image Transfer Wallet

… Continue reading →